Got A Problem With Your Submersible Pump?

Are you currently using submersible pumps? And are you facing problems with it? Are these problems recurring? Have you found a solution to it? Well, don’t get worried just yet. We’re here to help you. As experts of an industry that deals with pumps like high head submersible pumps, raw water pumps, etc., we understand all kinds of problems that one might face.

Therefore, in this blog, we are going to help you out by discussing the problems that are related to a submersible pump. Here, we are going to be focusing on one of the most common problems that a submersible pump faces, the possible reasons behind it, how you can check it, and finally, how you can correct it! So, let’s get started:

One of the most common problems- When your submersible pump isn't starting!

Possible Reason One- It is possible that power is not being supplied to the submersible pump.

Check- Try placing a voltmeter across the power lines that are coming into the submersible pump. In this way, you will be able to check the power supply for the overload protection box.

Correct- If you find that there is no power to the box, then the power company should be consulted.

Possible Reason Two- It is possible that there is no overload protection.

Check- Try examining the circuit breaker as well as the fuses to the submersible pump for ensuring that they are being operated correctly.

Correct- If you find that the breaker has been tripped, then replace the blown fuses and reset it.

Possible Reason Three- It is possible that the pressure switch on the submersible pump is damaged.

Check- Try checking the voltage across the switch, keeping in mind that the submersible pump pressure switch is in a closed position. If you find that the voltage drop is at the same level as compared to the line voltage, then it is obvious that the switch isn’t making contact.

Correct- In such a case, the contact points should be cleaned. Also, the pressure switch should be replaced for the given submersible pump. 

Just like this, there are more problems that a submersible pump faces. Sometimes, a submersible pump will not stop running, sometimes it starts up too much, and sometimes it works but would deliver little or no water. 

To know more about such problems and their solutions, call Darling Pumps at +91 99819 92833 or visit http://www.darlingpumps.in/.

Knowing a Sewage Pump!

Are you curious about pumps like submersible sewage pumps, dewatering pumps, raw water pumps, etc? Well, that’s a good thing to be! And you’ve landed at the right place to satisfy that curiosity. 

In this blog, we are going to be sharing about sewage pumps in particular. We will be covering the basic topics like what are sewage pumps, types of sewage pumps, benefits of sewage pumps as well as the maintenance and repairs that this device comes along with. 

Let’s get started with the very basic question; What are sewage pumps? 

This pump is used for transferring sewage liquids as well as solids from one place to another. In general cases, with residential applications, the sewage includes soft solids that go up to 2″ in diameter. It is pumped from a sewage basin to a septic tank or a sewer system. When it comes to a sewage pump, you should know that it is installed at the lowest point of the given sewage basin.

As the submersible sewage pump is submerged almost all the time, it gets this name. These pumps can be manual, automatic, or even dual mode. 

Let’s move on to the types of sewage pumps that are out there:

1. Effluent Pumps – These are the pumps that in most often cases, are used in a small on-site system.  Designed to pump effluent, they have the effluent flowing out of a septic tank. 

2. Solids Handling Pumps – Also called sewage ejector pumps, they are made to pump raw sewage. 

3. Grinder Pumps – Much like a solid-handling pump, this one can also pump raw sewage. The difference is that this pump comes with rotating blades, just like garbage grinders. Before the sewage has pumped, these blades cut as well as grind the solids into small particles.

Now, let’s talk about maintenance and repairs: 

1. Make sure that the ground fault circuit interrupter is working, if installed. 

2. When removing the cover, remember that there are 3 common types of lids with different removal methods.

3. Conduct an inspection of the pit for debris or silt. 

4.  Make sure to check the drain line from the pump until it meets the air gap and look for any signs that indicate holes, corrosion, leaks or damages.

When you think about the maintenance and repair tips, there can be many more. However, these should get you started! Keep researching and learning new things about your pumps to make better decisions as well as executions!