If you are one of those who has ever pumped slurry, you would be able to tell and know it in your heart, that it has the capability of being one of the most challenging fluids to be moved. The slurry is a fluid that is abrasive, sometimes corrosive, thick, and it is also known to contain huge amounts of solids within. There is no doubt about the fact that slurry is a fluid that is tough on the slurry pumps.
However, if you have a good amount of experience in using slurry pumps, you would also realize that the more you understand about what is going to be pumped, the better your water pump selection is going to be in every case. This decision will help you in decreasing the failures while pumping slurry.
To understand anything further than this, one should have a basic idea of what is slurry.
So, the question is, what is slurry?
Slurry refers to any mixture of fluid, such as water, combined with a pulverized solid. Slurries are known to be used as a convenient way for handling solids in bulk. This can be in mining, foundries, steel processing, and power generation. Generally, slurries tend to behave the same way as vicious as well as thick fluids, that flow under gravity behave.
So, one should be aware that slurries can be divided into two general categories. These are settling and non-settling. The non-settling slurries have very fine particles. They give the illusion of increased apparent viscosity. They have low wearing properties but need careful consideration when selecting the pump. This is because they don’t behave like a normal liquid does.
The settling slurries get formed due to coarse particles. These tend to form an unstable mixture. The flow and power calculations need attention while a pump is being selected. Mostly all slurry applications are made of coarse particles. This is why they have higher wear properties.
To understand anything further than this, one should have a basic idea of what is slurry.
So, the question is, what is slurry?
Slurry refers to any mixture of fluid, such as water, combined with a pulverized solid. Slurries are known to be used as a convenient way for handling solids in bulk. This can be in mining, foundries, steel processing, and power generation. Generally, slurries tend to behave the same way as vicious as well as thick fluids, that flow under gravity behave.
So, one should be aware that slurries can be divided into two general categories. These are settling and non-settling. The non-settling slurries have very fine particles. They give the illusion of increased apparent viscosity. They have low wearing properties but need careful consideration when selecting the pump. This is because they don’t behave like a normal liquid does.
The settling slurries get formed due to coarse particles. These tend to form an unstable mixture. The flow and power calculations need attention while a pump is being selected. Mostly all slurry applications are made of coarse particles. This is why they have higher wear properties.
There is another very important thing that should be kept in mind. In order to understand slurry pumping, one has to go to certain depths. Not only do you need to be aware of the basics like mentioned above, but you also need to know all about pump selection considerations.
Even after knowing it all, you need to put it into application. Only after gaining a good amount of experience with slurry pumps, you will be able to practice it successfully.
For more information on similar topics related to submersible sewage pumps, call Darling Pumps at +91 99819 92833 or visit http://www.darlingpumps.in/.
